Honda Acura NSX 1991 Service Manual page 107

40. Loosen the valve locknuts, backed off the adjust-
ing screw.
41. Remove the cam holder pipes, the cam holders
and the camshafts.
FRONT INTAKE
CAMSHAFT
V
OIL SEALS
Replace.
42. Screw a 5 mm bolt into each rocker shaft orifice,
then pull out the rocker shaft orifices.
ROCKER SHAFT
CAM HOLDER
PIPES
RUBBER SEAL
CAMSHAFT
mm
5 BOLT
43. Remove the spool valve assemblies.
44. Remove the sealing bolts.
BOLT
45. Bundle the rocker arms with a rubber band to
prevent them from separating.
46. Screw a 12 x 1.25 mm bolt into each rocker
shaft. Remove the rocker arms while slowly pull-
ing the rocker shafts out of the cylinder heads
toward the transmission.
RUBBER BAND
ROCKER ARM
ASSEMBLYS
I
12
BOLT
mm
B O L T