52. Remove the four mounting bolts from the rear
beam side bracket.
53. Lower the engine, suspension and beam assembly
a few inches with the chain hoist.
54. Check that wires and hoses are completely remov-
ed from the engine assembly.
TRUCK
55. Slowly lower the engine assembly on to a truck.
56. Remove the chain hoist from the engine.
57. Raise the body with the hoist. Roll the engine
assembly from under the body.
(SIDE BEAM)
,
NOTE: When installing, align the bolt holes of the
beam brackets and body with screwdriver.
GUIDE HOLE
(BODY)
\
SCREWDRIVER