Cranklcyl Sensor - Honda Acura NSX 1991 Service Manual

NOTE: Turn the crankshaft so that the No.1 piston is
at top-dead-center (page 6-26).
1 . Remove the timing belt (page 6-23 and 24).
2 . Remove the front intake and exhaust cam pulleys.
3. Remove the front timing belt cover plate.
4. Remove the CRANK/CYL sensor from the front
cylinder head.
10 x 1.25 mm
51 lb-ft)
mm
9 lb-ft)
FRONT INTAKE
CAM PULLEY
FRONT TIMING
BELT COVER PLATE
MIDDLE COVER
TIMING BELT
LOWER COVER
5 . Install the CRANK/CYL sensor in the reverse order
of removal;
l Refer to page 6-25 and 26, when installing the
timing belt.
SENSOR
10x 1.25 mm
51 lb-ft)
FRONT
CAMSHAFTS
TIMING
B E L T
. ',T.,
II I CWc ..ir-wa ,.&.
AM DI
6-27