Reverse Shift Fork Clearance Inspection; Change Lever Clearance Inspection - Honda Civic 2002-2003 Service Manual

•
•
•
Reverse Shift Fork Clearance
Inspection
1. Measure the clearance between the reverse idler
gear (A) and the reverse shift fork (8) with a feeler
gauge (C). If the clearance is more than the service
limit, go to step 2.
Standard: 0.20-0.59 mm (0.007-0.024 in.)
Service Limit: 1.3 mm (0.051 in.)
B
2. Measure the width of the reverse shift fork.
• If distance is not within the standard, replace the
reverse shift fork with a new one.
If distance is within the standard, replace the
reverse gear
with
a new one.
Standard: 13.4-13.7 mm (0.527-0.539 in.)
Change Lever Clearance Inspection
1. Measure the clearance between change lever IAI
and the select lever 18) with a feeler gauge ICI. If
the clearance is more than the service limit, go to
step 2.
Standard: 0.05-0.25 mm (0.002-0.010 in.)
Service Limit: 0.50 mm (0.020 in.)
B------J
L
2. Measure the groove of the change lever .
• If distance is not within the standard, replace the
change lever with a new one.
If distance is within the standard, replace the
select lever with a new one.
Standard: 15.00-15.10 mm (0.591-0.594 in.)
o
13-19