g. Turn ignition switch to LOCK, disconnect the negative
battery cable and wait for at least 90 seconds.
h. Using a digital multimeter, check for continuity between
driver seat belt pretensioner connector B-034 and body
ground to check for a short circuit to ground according to
the table below.
Standard Condition
Multimeter
Condition
Connection
B-034 (1) - Body
B-034 (2) - Body
ground
i. Release the activation prevention mechanism built into the
SRS control module assembly connector I-046/B-072.
j. Using a digital multimeter, check for continuity between
the terminals of driver seat belt pretensioner connector
B-034 according to the table below.
Standard Condition
Multimeter
Condition
Connection
B-034 (1) -
B-034 (2)
Replace SRS control module assembly
OK
Chery Automobile Co., Ltd.
Specified
Condition
Always
No continuity
Always
No continuity
Specified
Condition
Always
No continuity
32 - SUPPLEMENTAL RESTRAINT SYSTEM
+
-
1
2
-
+
B-034
+
-
1
2
-
+
B-034
32
RT21320250
RT21320260
NG
35
32–