Settings of FP7 MC Unit
Using CMI Tool
5.2 Axis Parameter Settings
5.2.1 Setting by CMI
The parameters common to each axis, such as the motor rotation direction and the logics of
near home input and limit input, are set by CMI. The following procedure is explained on the
condition that CMI has already started.
PROCEDURE
1. Select "Parameter" > "Axis parameter settings" from the menu bar.
The "Axis parameter settings" dialog box is displayed.
2. Set necessary parameters in accordance with the intended use.
3. Select "File" > "Save As" from the menu bar.
4. Enter an arbitrary file name, and press the [Save] button.
KEY POINTS
•
Although the data being edited is held until finishing CMI even when the
dialog box is closed with the X mark during the editing, save parameters by
executing "File" > "Save As".
5-6