Table of Contents
Advertisement
Supplementary Functions
SDO communication Write (send) method
The following flowchart shows the flow of the operation required in a user program for the
SDO communication writing process.
START
Set Station Address.
Station Address setting [UM 7C4B0]
Set Index.
Main - Index setting [UM 7C4B1]
Sub - Index setting [UM 7C4B2]
Set Data Width to perform SDO communication.
Data type setting [UM 7C4B3]
Bit width setting
Make settings of written data.
Sent/received data [UM 7C4C0]
｜
Sent/received data [UM 7C8BF]
①
Perform the write command request of
SDO communication.
Command request [UM 7C4B5] : "0x81 "
Communication result
[UM 7C4B6]="0x5555"
When
Communication
Result is;
FP7 MC Unit clears the write command request of SDO communication.
Command request
END
13-34
[UM 7C4B4]
Communication result
[UM 7C4B6] = "0xFFFF"
Communication result
[UM 7C4B6] = "0x0000"
[ UM 7C4B5 ] : "0x 0"
Confirm SDO communication error codes.
SDO communication error codes [UM 7C4B8–UM 7C4B9]
Correct communication settings according to
SDO communication codes.
* This is set only when Data
type setting is set to "0x9".
①
SDO
communication
settings
Settings of SDO
communication
transmission data
SDO
communication is
being performed.
Advertisement
Table of Contents
