Table of Contents
Advertisement
"Trigger Setting" dialog box
①
③
No.
Item
①
Setting object
②
Comparison
condition
Comparison
③
source
④
Comparison
destination
②
Description
The trigger for the setting is displayed.
Select comparison conditions to enable the trigger.
It will be valid when the leading edge (off to on) of the "condition set for
↑
Comparison source" is detected.
It will be valid when the trailing edge (on to off) of the "condition set for
↓
Comparison source" is detected.
It will be valid when the leading edge (off to on) or trailing edge (on to
↑↓
off) of the "condition set for Comparison source" is detected.
It will be valid when "condition set for Comparison source" is equal to
=
"condition set for Comparison destination".
It will be valid when "condition set for Comparison source" is not equal to
< >
"condition set for Comparison destination".
It will be valid when "condition set for Comparison source" is larger than
≧
or equal to "condition set for Comparison destination".
It will be valid when "condition set for Comparison source" is smaller
≦
than or equal to "condition set for Comparison destination".
Select devices for the comparison conditions. A fixed value can be selected for
Comparison source.
14.3 Trigger Condition Setting
④
14-11
Advertisement
Table of Contents
