Panasonic AFP7MC16EC User Manual page 314

Supplementary Functions
Error code Name
0000 0000H Normal end
0000 0001H Station address setting
value error
0000 0002H Sub index number setting
value error
0000 0003H Data type setting value
error
0000 0005H Command code setting
value error
0000 0006H Timeout value setting
value error
0000 0007H Station address setting
value error
0503 0000H SDO abort code
0504 0000H SDO abort code
0504 0001H SDO abort code
0504 0005H SDO abort code
0601 0000H SDO abort code
0601 0001H SDO abort code
0601 0002H SDO abort code
0601 0003H SDO abort code
0602 0000H SDO abort code
0604 0041H SDO abort code
0604 0042H SDO abort code
0604 0043H SDO abort code
0604 0047H SDO abort code
0606 0000H SDO abort code
0607 0010H SDO abort code
0607 0012H SDO abort code
0607 0013H SDO abort code
0609 0011H SDO abort code
0609 0030H SDO abort code
0609 0031H SDO abort code
0609 0032H SDO abort code
0609 0036H SDO abort code
0800 0000H SDO abort code
0800 0020H SDO abort code
0800 0021H SDO abort code
0800 0022H SDO abort code
0800 0023H SDO abort code
13-28
Description
(It does not exist in network.)
Toggle bit not changed.
SDO protocol timeout.
Client/Server command specifier not valid or unknown.
Out of memory.
Not supported access to an object.
Attempt to read to a write only object.
Attempt to write to a read only object.
Sub index cannot be written, SI0 must be 0 for write access.
The object does not exist in the object directory.
The object cannot be mapped into the PDO.
The number and length of the objects to be mapped would
exceed the PDO length.
General parameter incompatibility reason.
General internal incompatibility in the device.
Access failed due to a hardware error.
Data type does not match, length of service parameter does not
match.
Data type does not match, length of service parameter too high.
Data type does not match, length of service parameter too low.
Sub index does not exist.
Value range of parameter exceeded (only for write access).
Value of parameter written too high.
Value of parameter written too low.
Maximum value is less than minimum value.
General error.
Data cannot be transferred or stored the application.
Data cannot be transferred or stored to the application because
of local control.
Data cannot be transferred or stored to the application because
of the present device state.
Object dictionary dynamic generation fails or no object dictionary
is present.