Data Transfer to MC Unit and Test Operation
6.5.5 Positioning by Tool Operation Function
Specifying a starting table number enables to check if positioning from the starting table
operates properly.
PROCEDURE
1. Select "Online" > "Tool Operation" from the menu bar.
The "Tool operation" dialog box is displayed.
2. Select "Positioning" from the tool operation dialog box.
The "Tool operation - Positioning" dialog box is displayed.
3. Press the [Change] button under the target start table number field.
The starting table no. setting dialog box is displayed.
4. Input a starting table number.
5. Press the [Operate] button.
Positioning starts from the specified start table number.
6. Press [Exit] button to terminate the positioning operation.
6-20