Specifications
Unit
Axis no.
memory
no. (Hex)
-
UM 66F44
-
UM 66F45
16-86
Name
Default Description
Start phase
U0
of section 1
Displacement
K0
of section 1
When reading, the start phase in the section 1 of
the read cam pattern table is stored. The read value
is always 0.
When rewriting, the start phase in the section 1 of
the rewritten cam pattern table is set. When any
value other than 0 is set in the section 1, it cannot
be rewritten correctly.
bit
Name
Description
Range: 0 to 10000
(0 to 100.00%)
15-0
Start phase
Any other settings will be
errors.
When reading, stores it truncating the numbers
beyond the third decimal point.
When rewriting, the numbers beyond the third
decimal point are calculated in the unit and the
result is registered.
When reading, the displacement in the section 1 of
the read cam pattern table is stored.
When rewriting, the displacement in the section 1 of
the rewritten cam pattern table is set.
bit
Name
Description
Range: -10000 to +10000
(-100.00% to +100.00%)
Displacement
15-0
Any other settings will be
errors.
When reading, stores it truncating the numbers
beyond the third decimal point.
When rewriting, the numbers beyond the third
decimal point are calculated in the unit and the
result is registered.
●: Available, -: Not available
R
W