How To Set - Panasonic AFP7MC16EC User Manual

Supplementary Functions
13.13.4

How to Set

For using the packet monitor function, the settings related to the EC packet monitor are
configured in CMI.
 MC common settings dialog box
Item
EC packet monitor
request flag setting
Execute EC Packet
Monitor after Power ON
 Executing by user programs
For executing the packet monitor, turn on the EC packet monitor request (Y1) at an arbitrary
timing.
I/O Target
Name
allocation axis
EC packet
X1 All axes
monitor active
EC packet
Y1 All axes
monitor request
13-48
Default Description
Set the operation of packet monitor request flag of EC
(EtherCAT) communication.
Disabled
Disabled
Enabled
Set whether or not to execute the EC packet monitor after the
Not executed power is turned on.
Not executed / Executed
Description
Turns on when the monitoring of EtherCAT communication packet is
executed by the EC packet monitor request (Y1).
ON: Monitoring is executed, OFF: Monitoring stops
Requests the start of the monitor of EtherCAT communication packet
when the EC packet monitor request flag is enabled by "MC common
parameter". The packet data is saved in an SD memory card. The
monitoring stops when (Y1) turns off. The monitoring also stops, and
(X1) turns off when the packet monitor capacity reaches 6 Mbytes or
3904 packets.
Packet monitor is not executed when EC packet
monitor request flag turns on.
Packet monitor is executed when EC packet
monitor request flag turns on.