Trigger:usb:source:dminus - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

31
:TRIGger Commands

:TRIGger:USB:SOURce:DMINus

Command Syntax
:TRIGger:USB:SOURce:DMINus <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital<d>} for the MSO models
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :TRIGger:USB:SOURce:DMINus command sets the source for the USB
D- signal.
Query Syntax
:TRIGger:USB:SOURce:DMINus?
The :TRIGger:USB:SOURce:DMINus? query returns the current source for
the USB D- signal.
Return Format
<source><NL>
See Also •
•
•
•
954
(see page 1138)
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 886
":TRIGger:USB:SOURce:DPLus"
":TRIGger:USB:TRIGger"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 877
on page 955
on page 957