Step 5: Connect Power To The Acx Series Router; Connect Ac Power To An Ac-Powered Acx4000 Router - Juniper ACX4000 User Manual

Step 5: Connect Power to the ACX Series Router

IN THIS SECTION

Connect AC Power to an AC-Powered ACX4000 Router | 16

Connect DC Power to a DC-Powered ACX4000 Router | 17
Depending on your configuration, your router uses either AC or DC power supplies. Perform the appropriate
procedures for each power supply in your router.
WARNING:
Connect AC Power to an AC-Powered ACX4000 Router
To connect power to the AC-powered router, you need the following tools:
AC power cords with C15 plugs
1. Locate power cords that have a plug appropriate for your geographical location. For more information,
see the ACX4000 Universal Access Routers Hardware
2. Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the other
end of the strap to the ESD point on the chassis.
3. Insert the appliance coupler end of the power cord into the appliance inlet on the power supply.
4. Insert the power cord plug into an external AC power source receptacle.
NOTE: Each power supply must be connected to a dedicated AC power feed and a dedicated
customer site circuit breaker. We recommend that you use a dedicated customer site circuit
breaker rated for 4 A (100 VAC), or as required by local code.
You must ground the router before connecting the power cables.
Guide.
16