Responsibilities Of The Customer Engineer; Customer Engineer; Reference Material For Maintenance; Before Installation, Maintenance - Ricoh SP 150 Field Service Manual

Where symbols are used on or near switches on machines for Europe and other areas, the meaning of
each symbol conforms with IEC60417.

Responsibilities of the Customer Engineer

Customer Engineer

Replacement shall be done only by trained customer engineers who have completed service training for
the machine and all optional devices designed for use with the machine.

Reference Material for Maintenance

• Maintenance shall be done using the procedures prescribed for maintenance of the machine
described in the reference materials (service manuals, technical bulletins, operating instructions,
and safety guidelines for customer engineers).
• Use only consumable supplies and replacement parts designed for use with the machine.

Before Installation, Maintenance

Shipping and Moving the Machine

• Personnel moving or working around the machine should always wear proper clothing and
footwear. Never wear loose fitting clothing or accessories (neckties, loose sweaters, bracelets,
etc.) or casual footwear (slippers, sandals, etc.) when lifting or moving the machine.
• Always unplug the power cord from the power source before you move the machine. Before you
move the product, arrange the power cord so it will not fall under the machine.

Power

• Always disconnect the power plug before doing any replacement procedure. After switching off
the machine, power is still supplied to the main machine and other devices. To prevent electrical
shock, switch the machine off, wait for a few seconds, then unplug the machine from the power
source.
• Before you do any checks or adjustments after turning the machine off, work carefully to avoid
injury. After removing covers or opening the machine to do checks or adjustments, never touch
electrical components or moving parts (gears, timing belts, etc.).
2