Move Exec - Ricoh M022 Service Manual

• Remove the SD card cover [A] ( x 2), and then keep the SD card in the places [B] after you copy
the application program from one card to another card. This is done for the following reasons:
1) The SD card can be the only proof that the user is licensed to use the application program.
2) You may need to check the SD card and its data to solve a problem in the future.

Move Exec

The menu "Move Exec" (SP5-873-001) lets you copy application programs from the original SD card to
another SD card.
• Do not turn ON the write protect switch of the system SD card or application SD card on the machine.
If the write protect switch is ON, a download error (e.g. Error Code 44) occurs during a firmware
upgrade or application merge.
1. Turn the main switch off.
2. Make sure that an SD card is in SD Card Slot 1. The application program is copied to this SD card.
3. Insert the SD card with the application program in SD Card Slot 2.The application program is copied
from this SD card.
4. Turn the main switch on.
5. Start the SP mode.
6. Select SP5-873-001 "Move Exec."
7. Follow the messages shown on the operation panel.
8. Turn the main switch off.
9. Remove the SD card from SD Card Slot 2.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA
Controller Options
2
113