Clear Qos Statistics - Dell Force10 S4810P Reference Manual

Related
ip access-list extended
Commands
ip access-list standard
match ip access-group
match ip precedence
match ip dscp
match mac access-group
of the designated MAC ACL.
match mac dot1p
match mac vlan
service-queue
show qos class-map

clear qos statistics

Clears Matched Packets, Matched Bytes, and Dropped Packets. For TeraScale, clears Matched Packets, Matched
Bytes, Queued Packets, Queued Bytes, and Dropped Packets.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax clear qos statistics interface-name
Parameters
interface-name
Defaults none
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage
E-Series Only Behavior
Information
1314
– configures an extended IP ACL.
– configures a standard IP ACL.
– configures the match criteria based on the access control list (ACL).
– identifies the IP precedence values as match criteria.
– configures the match criteria based on the DSCP value.
– configures a match criterion for a class map based on the contents
– configures a match criterion for a class map based on a dot1p value.
– configures a match criterion for a class map based on VLAN ID.
– assigns a class map and QoS policy to different queues.
– views the current class map information.
Enter one of the following keywords:
•
•
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.