Show Storm-Control Multicast - Dell S4810 Reference Manual

show storm-control multicast

Display the storm control multicast configuration.
S4810
Syntax
show storm-control multicast [interface]
Parameters
interface
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.5.1.0
Version 8.3.7.0
Version 7.6.1.0
Example
Dell#show storm-control multicast gigabitethernet 1/0
Multicast storm control configuration
Interface
-----------------------------------------
Gi 1/0
Dell#
Storm Control
(OPTIONAL) Enter one of the following interfaces to display
the interface specific storm control configuration:
• For Fast Ethernet, enter the keyword Fastethernet
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/ port information.
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Direction
Ingress
Packets/Second
5
1619