Table of Contents
Advertisement
Section 400-Programming
MSG (Message) Key
Description
Programming
DBS-2.3/9.2-400
Programming Addresses That Affect the Analog Device. The following
addresses will control the analog device, but will not affect the digital key
telephone:
AEC Disconnect Duration
SLT Flash Control
SLT Onhook Flash Timer
AEC Disconnect
or 1)#
Analog Port on Large-Display Phone
or 1)#
Data Security on Analog Port
or 1)#
The MSG key on the VB-44225 Large-Display Phone adds the following
functionality to the phone:
• Auto-Callback. If a callback message has been left by another
extension, you can press the MSG key to place an automatic callback to
the extension that sent the message. If more than one callback message
has been received, pressing the MSG key will perform auto-callback in
the order received.
• Auto-Answer Voice Message. You can press the MSG key to
automatically access your voice mailbox. The phone will dial your
voice mailbox and send access codes (if programmed) for retrieving
messages.
Auto-Callback is always enabled for large display phones. Use the
following to enable the MSG key for Auto-Answer Voice Message.
to enable the MSG key for Auto-Answer Voice Message...
FF3 (ExtPort)# 53# (0 or 1)#
Extension Port where
VB-44225 Large-Display
Phone is installed
DBS Manual - Revised April 2000
Appendix C. EX 1.0 Feature Update
FF1 2# 1# 35# (0-15)#
FF1 2# 1# 11# (0 or 1)#
FF1 3# 14# (0-6)#
FF3 (ExtPort)# 46# (0
FF3 (ExtPort)# 51# (0
FF3 (ExtPort)# 52# (0
0=Disable MSG key from returning
a "Message Waiting".
1=Enable MSG key for returning
a "Message Waiting".
Page C-19
Advertisement
Table of Contents
