Disa Inbound Call Id Code - Panasonic DBS-2.3-400 Programming Manual

Chapter 1. System Programming (FF1)

DISA Inbound Call ID Code

Software Version: All Versions
Address: FF1 5# (0000-9999)#
Description
Use this address to set a valid ID code for inbound DISA (Direct Inward
System Access) callers. By default, no ID code is defined, which means a
caller who dials a DISA trunk will receive intercom dial tone immediately
without entering an ID code.
If you define a DISA Inbound Call ID Code in this address, callers dialing in
on the DISA trunk will receive a fast-busy tone. The caller must then dial the
DISA Inbound Call ID Code to receive the intercom dial tone.
Programming
To set the DISA ID Code ...
To clear the DISA ID Code ...
Related Programming
DISA Outbound Call ID Code 1: FF1 6# 1# (0000-9999)#
DISA Outbound Call ID Code 2: FF1 6# 2# (0000-9999)#
DISA Start Time
DISA End Time: FF2 (Trunk)# 20# HHMM#
DISA Auto Answer: FF2 (Trunk)# 11# HHMM#
Page 1-130
FF1 5# (0000-9999)#
FF1 5# CONF ON/OFF
FF2 (Trunk)# 19# HHMM#
:
DBS Manual - Revised April 2000
Section 400-Programming
4-Digit DISA Inbound ID Code
(Default: ****)
DBS-2.3/9.2-400