Disa Start Time - Panasonic DBS-2.3-400 Programming Manual

Chapter 2. Trunk Programming (FF2)

DISA Start Time

Software Version: All Versions
Address: FF2 (Trunk)# 19# (HHMM)#
Description
Use this address to program a DISA trunk to begin DISA operation at a
specified time each day. Trunks are enabled for DISA using the DISA Auto
Answer address (FF2 Trunk# 11#). Use this DISA Start Time address, and
the DISA End Time address following, to limit DISA operation on a trunk to
a certain time period each day.
Programming
To set the DISA Start Time ...
Enter the time using the 24-hour format. For example, enter 1515 to set the
time to 3:15 p.m.
To clear the DISA Start Time ...
Related Programming
Time Setting: FF1 1# 2# (HHMM)#
DISA Inbound Call ID Code: FF1 5# (0000-9999)#
DISA Outbound Call ID Code 1: FF1 6# 1# (0000-9999)#
DISA Outbound Call ID Code 2: FF1 6# 2# (0000-9999)#
DISA Auto Answer: FF2 (Trunk)# 11# (0 or 1)#
DISA End Time: FF2 (Trunk)# 20# (HHMM)#
Notes
DISA Operation With Default Setting. If DISA Start Time is not set in this
address (left at default ****), DISA operation will be on all the time.
Caller ID Automatic DISA. This DISA Start Time setting does not affect
Automatic DISA operation with Caller ID (FF1 2# 8# 1-10# PhoneNo.#).
Page 2-16
FF2 (1-64)# 19# (HHMM)#
Trunk Number
FF2 (1-64)# 19# CONF ON/OFF
DBS Manual - Revised April 2000
Section 400-Programming
Time Setting (24-hr. format)
Default: **** (not set)
DBS-2.3/9.2-400