Table of Contents
Advertisement
Appendix C. EX 1.0 Feature Update
Extension Numbers
Description
Forced LCR/NRS
Description
Programming
Page C-36
to determine the type of trunk signaling for each T1 channel...
FF1 8# 4# 6# (1-64) 1# (0-4)#
V1.0
The address for extension number assignments has been modified to allow
for 4-digit extensions.
to assign extension numbers to ports...
FF3 (1-144)# 1# (10-69, 100-699, N100-N699)#
Extension Port
The address for Forced Least Cost Routing has been modified to include
Network Node Route Selection (NRS).
DBS Manual - Revised April 2000
Trunk Number (1-64)
0=Loop Start
1=Ground start 1 (used for all ground start trunks)
2=Ground start 2 (not currently used)
3=E&M
4=E&M Network
Extension Number
Defaults: Port 1=10, 100, or 1000
Note: N=DBS network node number 1-4
Section 400-Programming
Port 2=11, 101, or 1001
Port 3=12, 102, or 1002
etc.
DBS-2.3/9.2-400
Advertisement
Table of Contents
