Extension Lockout Code - Panasonic DBS-2.3-400 Programming Manual

Chapter 3. Extension Programming (FF3)

Extension Lockout Code

Software Version: All Versions
Address: FF3 (ExtPort)# 6# (0000-9999)#
Description
Use this address to assign a 4-digit Station Lockout code to an extension.
This allows an extension user to "lock" the phone, preventing others from
being able to place or receive outside calls on the phone while the extension
user is away. However, the locked extension can be used for intercom calls.
NOTE: Assigning Station Lockout codes must be performed on an Attendant
or key phone.
Programming
To assign a Station Lockout Code to an extension ...
(must be performed on an Attendant or key phone)
To clear a Station Lockout Code assignment ...
Notes
Locking An Extension. To lock an extension, dial "74" plus the Station
Lockout Code. Repeat to unlock it.
Using the Station Lockout Code. If an extension is "locked" with the
Station Lockout Code, the extension phone will not allow incoming or
outgoing trunk calls, including transferred trunk calls.
Page 3-10
FF3 (1-144)# 6# (0000-9999)#
Extension Port
FF3 (1-144)# 6# CONF ON/OFF
Extension Port CAUTION: Before clearing a lockout code,
make sure the extension is currently "unlocked" --
otherwise, the extension will remain locked until
another lockout code is assigned to it, and then
the new code is used to unlock the extension.
DBS Manual - Revised April 2000
Section 400-Programming
Extension Lockout Code
DBS-2.3/9.2-400