Extension Numbers - Panasonic DBS-2.3-400 Programming Manual

Table of Contents

Advertisement

Section 400-Programming

Extension Numbers

Software Version: All Versions
Address:
FF3 (ExtPort)# 1# (10-69 or 100-699)#
Description
This program assigns an extension number to an extension port.
• An extension number is the 2-digit or 3-digit number that is dialed to reach
• An extension port is the physical location (RJ21x on the DBS connector)
Programming
To assign an Extension Number ...
To clear an Extension Number ...
Related Programming
Extension Number Digits: FF1 2# 1# 12# (0 or 1)##
Second Attendant Position: FF1 2# 1# 24# (11-69 or 101-699)#
Third Attendant Position: FF1 2# 1# 25# (11-69 or 101-699)#
Fourth Attendant Position: FF1 2# 1# 26# (11-69 or 101-699)#
Extension Names: FF6 1# (ExtPort)# CONF (Name)#
DBS-2.3/9.2-400
the extension phone. Extension numbers are programmable and can be
changed.
into which the phone is plugged. Extension ports have fixed numbers
which can't be changed (you can't assign a different port number to the
same port).
FF3 (1-144)# 1# (10-69 or 100-699)#
Extension Port
FF3 (1-144)# 1# CONF
NOTE: After clearing an extension number, the port is inoperative
until an extension number is reassigned to it, and the phone is
unplugged from the system and then plugged back in.
DBS Manual - Revised April 2000
Chapter 3. Extension Programming (FF3)
Extension Number
Defaults: Port 1=10 or 100
Port 2=11 or 101
Port 3=12 or 102 ... etc.
Page 3-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dbs-9.2-400

Table of Contents