Table of Contents
Advertisement
Section 400-Programming
Related Programming
PBX Flash Timer: FF1 3# 18# (0-10)#
Auto Flash Redial: FF1 2# 1# 6# (0 or 1)#
Trunk Circuit Type: FF2 (Trunk)# 21# (0 or 1)#
Dialing Restriction During Inbound Trunk Calls for TRS Types 3-6: FF7 1#
2# (0 or 1)#
Notes
Circuit Card Requirements. Timer settings 11-15 are only available with
the loop-start trunk card (Part No. VB-43510A or VB-43511A).
Phone Type Restriction. The FLASH key function applies only to digital and
digital single-line telephones.
Trunk Type Restriction. This timer only applies to loop-start trunks.
FLASH and REDIAL Restriction. FLASH and REDIAL features are not
available with ground-start trunks. See Technote 13 (March 1992) for further
information.
SLT Flash Operation. Single-line telephones must press the hookswitch and
dial "87" to activate this feature.
Using FLASH Key With PBX or Centrex Lines. If you are using a PBX or
Centrex line, the FLASH key places the call on hold. See PBX Flash Timer
address (FF1 3# 18#) for more information.
DBS-2.3/9.2-400
10
1.1 seconds
11
1.5 seconds
12
2 seconds
13
2.5 seconds
14
3.0 seconds
15
3.5 seconds
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
Page 1-107
Advertisement
Table of Contents
