Attendant Hunt Group Recall Timer; Table 1-13. Attendant Hunt Group Recall Timer Values For Co Calls - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

Attendant Hunt Group Recall Timer

Software Version: All Versions
Address: FF1 3# 6# (0-12)#
Description
When an Attendant phone transfers a trunk call to a hunt group, the
transferred call will recall to the Attendant if it is not answered. This timer
determines how long the call will go unanswered before it recalls (20 seconds
by default).
Programming

Table 1-13. Attendant Hunt Group Recall Timer values for CO calls

DBS-2.3/9.2-400
FF1 3# 6# (0-12)#
Attendant Hunt Group Recall Timer setting
Default: 1 (20 seconds) (see table below)
Setting
0 No recall
1 20 seconds
2 40 seconds
3 60 seconds
4 80 seconds
5 100 seconds
6 120 seconds
7 140 seconds
8 160 seconds
9 180 seconds
10 200 seconds
11 220 seconds
12 240 seconds
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
Value
Page 1-99