Key Bank Hold - Panasonic DBS-2.3-400 Programming Manual

Chapter 1. System Programming (FF1)

Key Bank Hold

Software Version: All Versions
Address: FF1 2# 1# 9# (0 or 1)#
Description
Use this address to enable or disable the Key Bank Hold feature in the DBS
system.
• If Key Bank Hold is enabled:
• If Key Bank Hold is disabled (default setting), the phone user must press
Programming
Page 1-14
- a phone user can switch back and forth between trunk calls (by
pressing the FF key for each trunk) without placing the current
trunk on hold.
- an Attendant phone can press a DSS/BLF key to automatically
transfer a trunk call to an extension without pressing HOLD
first.
In both cases, the DBS will automatically place the current trunk call on
System Hold (anyone can pick up the call) when the phone user presses the
FF key or DSS/BLF key.
HOLD before accessing a second trunk or transferring a call.
FF1 2# 1# 9# (0 or 1)#
DBS Manual - Revised April 2000
Section 400-Programming
0=Key Bank Hold is disabled.
1=Key Bank Hold is enabled.
DBS-2.3/9.2-400