Co Delayed Night Ring Assignments For Hunt Groups - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

CO Delayed Night Ring Assignments for Hunt Groups

Software Version: CPC-AII (all versions); CPC-B Version 2.0 or higher
Address: FF4 6# (HuntGrp)# (Trunk)# (0 or 1)#
Description
This program assigns delayed ringing to hunt groups for unanswered calls on
specific trunks during "Night" mode. Delayed ringing is when an
unanswered incoming call starts ringing at another extension after a certain
period of time (the first extension will stop ringing).
Programming
Related Programming
Delayed Ring: FF1 2# 1# 23# (0 or 1)#
CO Delayed Ring Timer: FF1 3# 26# (0-15)#
CO Night Ring Assignments for Hunt Groups: FF4 2# (HuntGrp)#
(Trunk)# (0 or 1)#
Hunt Group Members: FF4 3# (1-8)# (5-12/20)# (100-699)#
Notes
Attendant Interactions. If the Primary Attendant is assigned delayed
ringing, the Attendant Overflow feature will be disabled. Also, if the Delayed
Ring function is enabled and no extensions are assigned or capable of ringing
(DND, unplugged, etc.), the ringing line will automatically ring the
Attendant.
Night Mode. Beginning with CPC-AII/B Version 7.0, there are two separate
Night modes -- "Night" and "Night 2". This address controls "Night"
delayed ring assignments (see FF4 9# 2# for "Night 2" delayed ringing).
DBS-2.3/9.2-400
FF4 6# (79-86 or 151-158)# (1-64)# (0 or 1)#
Hunt Groups 1 thru 8:
CPC-AII or CPC-B
79 -or- 151 for Hunt Group 1
80 -or- 152 for Hunt Group 2
81 -or- 153 for Hunt Group 3
82 -or- 154 for Hunt Group 4
83 -or- 155 for Hunt Group 5
84 -or- 156 for Hunt Group 6
85 -or- 157 for Hunt Group 7
86 -or- 158 for Hunt Group 8
DBS Manual - Revised April 2000
Chapter 4. Ringing and Hunt Groups (FF4)
Trunk No. 0=Trunk does not ring.
1=Trunk rings.
Page 4-23