Table of Contents
Advertisement
Chapter 1. System Programming (FF1)
Loss of Signal Counter
Software Version: CPC-B Version 4.0 or higher
Address: Master Cabinet: FF1 8# 4# 4# 3# 4# (0-9000)#
Slave Cabinet:
Description
Determines how many instances of loss of signal must occur before a Signal
Loss Alarm FF key is lit. Signal loss occurs when the incoming T1 signal is
not received for more than 150 ms. The FF key lights when the counter
exceeds the specified number within a 24-hour period.
For instructions on programming T1 alarm keys, see the T1 Reference
Manual (Section 500).
Programming
Related Programming
Red Alarm Relay: FF1 8# 4# (4 or 5)# 4# 2# (0 or 1)#
Red Alarm Detection: FF1 8# 4# (4 or 5)# 2# 1# (0 or 1)#
Page 1-180
FF1 8# 4# 5# 3# 4# (0-9000)#
FF1 8# 4# (4 or 5)# 3# 4# (0-9000)#
4=Master Cabinet
5=Slave Cabinet
DBS Manual - Revised April 2000
Section 400-Programming
Instances of Signal Loss that must occur
within a 24-hour period before a
Signal Loss Alarm FF key is lit
Default: 9000
DBS-2.3/9.2-400
Advertisement
Table of Contents
