Attendant Transfer Extension - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

Attendant Transfer Extension

Software Version: CPC-AII (all versions) and CPC-B Version 2.09 or higher
Address: FF1 2# 1# 27# (11-69 or 101-699)#
Description
If all line appearances are busy on all Attendants (Primary, Second, Third and
Fourth), calls will transfer to the extension assigned in this address.
Programming
To assign an Attendant Transfer Extension ...
To clear the Attendant Transfer Extension ...
Notes
Pilot Number Restriction. The overflow position must be an installed
extension -- it cannot be a hunt group pilot number.
DBS-2.3/9.2-400
FF1 2# 1# 27# (11-69 or 101-699)#
(default: no Transfer Extension assigned)
FF1 2# 1# 27# CONF ON/OFF
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
Extension Number
Page 1-35