Table of Contents
Advertisement
Section 400-Programming
DID/DNIS and T1 Settings
Inbound DID Dial Numbers
Software Version: CPC-B Version 3.1 or higher
Address: FF1 8# 3# (0000-9999)# (10-69 or 100-699)#
Description
Use this address to assign DID number(s) to extension(s).
• Up to 500 DID numbers can be assigned.
• One DID number can be assigned to multiple extensions (this will take up
• One extension can have multiple DID numbers assigned to it. (The
Programming
Related Programming
Multiple DID/DNIS: FF1 2# 1# 32# (0 or 1)#
DID/DNIS (enabling trunks for): FF1 8# 4# 6# (Trunk)# 2# (0-2)#
DID Flexible Ringing Assignments: FF1 8# 5# (DIDNo.)# (ExtNo.)#
DID Immediate or Wink Start: FF2 (Trunk)# 22# (0 or 1)#
Wink Start Timer: FF2 (Trunk)# 23# (0-15)#
Time Out for Dialed DID Digits: FF2 (Trunk)# 24# (0-15)#
DID Interdigit Timeout: FF2 (Trunk)# 25# (0-15)#
Extension Numbers: FF3 (ExtPort)# 1# (ExtNo.)#
Notes
DID Number Assignment in Older CPC-B Version. In CPC-B Version 2.0,
DID numbers were stored with extension port settings, rather than in a
separate table (see FF3 ExtPort# 35# for more information).
DBS-2.3/9.2-400
only one entry in the 500 available entries).
number of entries taken up is equal to the number of DID numbers
assigned to the extension.)
FF1 8# 3# (0000-9999)# (10-69 or 100-699)#
4-Digit DID Number
(0000[00]-1111[11])#
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
Extension Number
Page 1-135
Advertisement
Table of Contents
