Chapter 2. Trunk Programming (Ff2); Trunk Port Operation - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

Trunk Port Operation

Software Version: All Versions
Address: FF2 (Trunk)# 1# (0 or 1)#
Description
Use this feature to put a CO trunk in service or "busy it out".
Programming
Notes
Precaution on Putting Lines Out of Service. If you busy-out a trunk, an
incoming caller on that trunk will still hear ringing, even though the trunk is
not functional.
DBS-2.3/9.2-400
FF2 (1-64)# 1# (0 or 1)#
Trunk Number
DBS Manual - Revised April 2000

Chapter 2. Trunk Programming (FF2)

0=Place trunk in service.
1=Busy-out the trunk.
Page 2-3