Api Baud Rate - Panasonic DBS-2.3-400 Programming Manual

Chapter 1. System Programming (FF1)

API Baud Rate

Software Version: CPC-AII and CPC-B, Version 7.0 or higher
Address: FF1 2# 1# (41 or 42)# 2# (0 or 1)#
Description
The baud rate for the TSAPI port can be set to either 9600 or 19200 bps.
Programming
Related Programming
API Port Type: FF1 2# 1# (41 or 42)# 1# (0 or 1)#
Notes
Using Both API Ports. If both API ports are being used, both baud rates
must be set to 9600 bps.
Page 1-54
FF1 2# 1# (41 or 42)# 2# (0 or 1)#
API Port Number:
41=API Port 1
42=API Port 2
DBS Manual - Revised April 2000
Section 400-Programming
Baud Rate:
0=9600 bps
1=19200 bps
DBS-2.3/9.2-400