General Notes; Figure 6-1. Key Layout Of A Dss/72 Console For Text Name Assignment - Panasonic DBS-2.3-400 Programming Manual

General Notes

Assigning text names via FF6 programming requires the use of a DSS/BLF
phone. Figure 6-1 below shows the key layout of a DSS/72 console that can
be used for assigning text names. The left- and right-arrow keys, located on
the bottom row of the expansion unit (on the right), can be used to move the
cursor backward and forward through the letters of a name entry.
Some text names can also be assigned without entering the programming
mode (see Section 700-Feature Operation for instructions), while others
require FF6 programming.
Text Names that can be assigned without entering programming
mode ...
Text Names that can only be assigned using FF6 programming ...

Figure 6-1. Key layout of a DSS/72 console for text name assignment

Page 6-2
Extension Names
System Speed Dial Names
Personal Speed Dial Names
Call Waiting/OHVA Text Reply
Absence Messages
Trunk Names
Hunt Group Names
DID/DNIS Names
DBS Manual - Revised April 2000 DBS-2.3/9.2-400