Table of Contents
Advertisement
Section 400-Programming
CO Night Ring Assignments
Software Version: All Versions
Address: FF4 2# (ExtPort)# (Trunk)# (0 or 1)#
Description
This program determines which extension(s) will receive incoming calls on a
particular trunk when the DBS system is in "Night" mode.
Programming
Notes
Default Attendant Ring Assignments. All trunks are set to ring on ports 1
and 2 (the Primary and Second Attendants) by default.
Routing of Trunks With No Ring Assignments. If a trunk is not assigned to
ring a specific extension, it will still ring the Attendant phone.
Night Mode. Beginning with CPC-AII/B Version 7.0, there are two separate
Night modes -- "Night" and "Night 2". This address controls "Night" ring
assignments (see FF4 9# 1# for "Night 2" ring assignments).
DBS-2.3/9.2-400
FF4 2# (1-73 or 1-145)# (1-64)# (0 or 1)#
Extension Port
Note: Use port 73 (for single-cabinet systems) or 145 (for double-
cabinet systems) to assign ringing to an external paging or Universal
Night Answer (UNA) device.
DBS Manual - Revised April 2000
Chapter 4. Ringing and Hunt Groups (FF4)
Trunk Number
0=Trunk does not ring.
1=Trunk rings.
Page 4-5
Advertisement
Table of Contents
