Table of Contents
Advertisement
Section 400-Programming
Notes
Default Key Assignments. The FF keys on Attendant consoles 1 and 2 are
assigned by default as MCO keys. Attendant consoles 3 and 4 do not have
default key assignments.
Restriction on Trunk LED Indications. Only the first 24 FF keys will light
for trunks that are assigned to them. Trunks can be assigned to the remaining
keys from the phone (rather than through programming mode), but the LEDs
will not light.
FF11 and FF12 in the Feature Codes. The * and # phone keys are used as
movement keys (for scrolling through addresses) while in programming
mode. Therefore, when programming feature codes for FF keys, FF11 and
FF12 are used instead to represent * and # (FF11 enters *; FF12 enters #).
The phone will not display the symbol when you press FF11 or FF12, but it
will register * or # as part of the feature code.
DBS-2.3/9.2-400
DBS Manual - Revised April 2000
Chapter 5. FF Key Programming (FF5)
Page 5-11
Advertisement
Table of Contents
