Call Coverage Group Members - Panasonic DBS-2.3-400 Programming Manual

Chapter 4. Ringing and Hunt Groups (FF4)

Call Coverage Group Members

Software Version: All Versions
Address: FF4 4# (CovGrp)# (Position)# (ExtNo.)#
Description
A Call Coverage Group allows up to two extensions (one at a time) to serve
as backup answering positions for as many as six other extensions.
For example, if extensions 201-206 want their unanswered calls to be picked
up by extensions 207 or 208:
• Assign extensions 207 and 208 to Call Coverage Group positions 1 and 2.
• Assign extensions 201-206 to Call Coverage Group positions 3-8.
All incoming calls to the members will ring once on position 1's phone (if
idle); the member's extension number will display on position 1's phone
(even if not idle). To pick up the call, position 1 presses the appropriate DSS/
BLF key assigned to the extension (or use Direct Call Pickup to take the call).
Member calls will not ring or display on position 2's phone unless position 1
is set for Call Forwarding, Absence Message, DND, or is busy on all MCO/
ML keys.
Programming
To assign an extension to a Call Coverage Group ...
To clear an extension from the Call Coverage Group ...
Related Programming
Extension Number Digits: FF1 2# 1# 12# (0 or 1)##
FF Key Programming: FF5 addresses
Page 4-18
FF4 4# (1-16)# (1-8)# (10-69 or 100-699)#
Call Coverage Group
Note: Positions 1 and 2 are secretary positions; 3-8 are member positions.
FF4 4# (1-16)# (1-8)# CONF ON/OFF
Call Coverage Group
DBS Manual - Revised April 2000
Section 400-Programming
Position in Group
Position in Group
Extension Number
DBS-2.3/9.2-400