Panasonic DBS-2.3-400 Programming Manual page 565

Section 400-Programming
Station Message Detail Recording (SMDR) not Printing Long Distance
Calls
Previously if FF1 2# 2# 7# was set for long distance only, when a long
distance call was placed, it was not recorded by SMDR. SMDR now correctly
prints out long distance calls.
Programming Considerations
FF1 2# 2# 7#
Caller-ID Automatic Number Identification (ANI) is not Sent to the
Applications Programming Interface (API) when the Incoming Trunk is
ISDN
In previous versions, Caller-ID (ANI) information was not sent to the API
when the incoming trunk was ISDN. In this release, the Caller-ID (ANI)
information is sent to the API.
Programming Considerations
None
SLTA Repeating Digits
Repeating digits were sent when an SLTA was used on a T1 circuit to call
another T1-Network node, or to call out of another T1 node to a CO. If an
SLTA was used, to call on a T1 circuit, to another node or out of another node
to a CO trunk, once the call was established, if digits were sent from the
SLTA, the digits would be repeated.
Example: If you dial 12345 from an SLT, the called party receives
This problem is corrected with this release.
Programming Considerations
None
Call Forward Outside Call was Recalled After Recall Timer expired
Previously, if an incoming call was transferred from Station A to Station B
(which was set for Call Forward Outside), the following events occurred--
when Station A's Call Forward No Answer Timer expired (after the call was
established with an outside CO), the outside connection was terminated, and
the call was recalled to Station A. This problem is resolved in this version.
DBS-2.3/9.2-400
1122334455)
DBS Manual - Revised April 2000
Appendix K. CPC-EX 2.3 Feature Update
Page K-25