Table of Contents
Advertisement
Chapter 1. System Programming (FF1)
Hunt Group No Answer Timer
Software Version: CPC-AII (all versions) and CPC-B Version 3.1 or higher
Address: FF1 3# 28# (0-15)#
Description
If a call has entered a hunt group and the first extension to ring is not
answered, this timer determines how long the extension will ring before the
next idle extension in the hunt group begins ringing (12 seconds by default).
Programming
Table 1-35 Hunt Group No Answer Timer values
Notes
Extension Delayed Ring Control in Older CPC-B Versions. In CPC-B
versions prior to 3.1, extension delayed ringing is controlled by the Call
Forward-No Answer Timer (FF1 3# 19# 0-15#).
Page 1-124
FF1 3# 28# (0-15)#
Hunt Group No Answer Timer setting
Default: 2 (after 12 seconds) (see table below)
Setting
0
After 4 seconds
1
After 8 seconds
2
After 12 seconds
3
After 16 seconds
4
After 20 seconds
5
After 24 seconds
6
After 28 seconds
7
After 32 seconds
8
After 34 seconds
9
After 36 seconds
10
After 44 seconds
11
After 48 seconds
12
After 52 seconds
13
After 56 seconds
14
After 60 seconds
15
After 64 seconds
DBS Manual - Revised April 2000
Section 400-Programming
Value
DBS-2.3/9.2-400
Advertisement
Table of Contents
