Did/Dnis Text Name Assignment - Panasonic DBS-2.3-400 Programming Manual

Table of Contents

Advertisement

Section 400-Programming

DID/DNIS Text Name Assignment

Software Version: CPC-B Version 5.0 or higher
Address: DID:
FF6 8# (1-200)# (1 or 2)# (0000-9999)# (NNNNNN)#
DNIS: FF6 9# (1-200)# (1 or 2)# (0000-9999)# (NNNNNN)#
Description
Assign DID/DNIS names of up to 6 characters long for specific DID/DNIS
numbers.
DID/DNIS text names can only be assigned via FF6 programming. The DID/
DNIS number must already be assigned to an extension, before you can
assign a name to the number. (see FF1 8# 3# for DID numbers; FF1 8# 4# 7#
for DNIS numbers)
Programming
To assign a DID/DNIS text name ...
FF6 (8 or 9)# (1-200)# (1 or 2)# (0000-9999)# (NNNNNN)#
8=DID
9=DNIS
To clear a DID/DNIS text name ...
Related Programming
Inbound DID Numbers: FF1 8# 3# (DIDNo.)# (ExtNo.)#
DNIS Number Setting: FF1 8# 4# 7# (DNISNo.)# (ExtNo.)#
Notes
Maximums. Up to 200 DID text names and 200 DNIS text names can be
assigned.
DBS-2.3/9.2-400
DID/DNIS Text
Assignment Table
FF6 (8 or 9)# (1-200)# (1 or 2)# CONF ON/OFF
8=DID
DID/DNIS Text
9=DNIS
Assignment Table
DBS Manual - Revised April 2000
Chapter 6. Name and Message Assignments (FF6)
1=Assign a number DID/DNIS
to a name
2=Change a name
1=Number and name
2=Name only
Name Text
Number
(up to 6 char.)
(only if "1"
is selected)
Page 6-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dbs-9.2-400

Table of Contents