Frame Loss Relay - Panasonic DBS-2.3-400 Programming Manual

Chapter 1. System Programming (FF1)

Frame Loss Relay

Software Version: CPC-B Version 4.0 or higher
Address: Master Cabinet: FF1 8# 4# 4# 4# 4# (0 or 1)#
Slave Cabinet:
Description
Determines whether the system closes the alarm relay on the T1 MDF card in
the event of frame loss alarms.
The alarm relay can be connected to an external alarm device such as a
buzzer. (This device must be purchased separately; it is not provided with the
DBS T1.)
Programming
Related Programming
Frame Loss Counter: FF1 8# 4# 4/5# 3# 1# (0-9000)#
Page 1-186
FF1 8# 4# 5# 4# 4# (0 or 1)#
FF1 8# 4# (4 or 5)# 4# 4# (0 or 1)#
4=Master Cabinet
5=Slave Cabinet
DBS Manual - Revised April 2000
Section 400-Programming
0=Off (Frame Loss relay does not close)
1=On (Frame Loss relay closes)
DBS-2.3/9.2-400