Understanding Ff Key Programming; Program Structure; Table 1. Dbs Program Structure - Panasonic DBS-2.3-400 Programming Manual

Introduction to DBS Programming

Understanding FF Key Programming

Program Structure

Program entries for the DBS are organized into 10 primary groups, which are
listed in Table 1 below. Each group has its own Flexible Function (FF) key
on the phone. These keys can be identified by the LED on the left side of the
key. On key telephones, the FF keys are numbered left-to-right, starting on
the bottom row.
After you enter the programming mode (see "How to Enter the
Programming Mode", next page), press the desired FF key to start
programming the entries ("addresses") of the group. The phone's LCD
display will prompt you through the addresses.
Table 1. DBS program structure
In the programming mode, some of the phone keys can be used to store your
settings and move forward or backward through the program addresses.
Figure 2 (next page) identifies these keys and what they do in programming
mode.
Intro-6
FF Key
FF1 System settings
FF2 CO Trunk settings
FF3 Extension settings
FF4 Ring Assignments and Hunt Groups
FF5 FF Key Assignments
FF6 Names and Messages on LCD Display
FF7 Toll Restrictions (TRS)
FF8 Least Cost Routing (LCR)
FF9 Copy Program Settings
FF10 Speed-Dialing (system and personal)
DBS Manual - Revised April 2000
Section 400-Programming
Programming Group
DBS-2.3/9.2-400