Co Night 2 Ring Assignments - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

CO Night 2 Ring Assignments

Software Version: CPC-AII and CPC-B, Version 7.0 or higher
Address: FF4 9# 1# (ExtPort)# (Trunk)# (0 or 1)#
Description
This program determines which extension(s) will receive incoming calls from
a particular trunk when the DBS is in "Night 2" mode.
Programming
Notes
Default Attendant Ring Assignments. All trunks are set to ring on ports 1
and 2 (the Primary and Second Attendants) by default. If a trunk is not
assigned to ring at a specific extension, it will still ring the Attendant.
DBS-2.3/9.2-400
FF4 9# 1# (1-73 or 1-145)# (1-64)# (0 or 1)#
Extension Port
Note: Use port 73 (for single-cabinet systems) or 145 (for double-
cabinet systems) to assign ringing to an external paging or Universal
Night Answer (UNA) device.
DBS Manual - Revised April 2000
Chapter 4. Ringing and Hunt Groups (FF4)
Trunk Number
0=Trunk does not ring.
1=Trunk rings.
Page 4-27