Class Of Service; Extension Class Of Service - Panasonic DBS-2.3-400 Programming Manual

Chapter 1. System Programming (FF1)

Class of Service

Extension Class Of Service

Software Version: CPC-AII (all versions); CPC-B Version 3.1 or higher
Address: FF1 2# 5# (1-8)# (1-21)# (0 or 1)#
Description
This address allows you to define up to 8 different Classes of Service, by
enabling or disabling the phone features of each. Up to 21 features are
available (see table below). The definable Classes of Service are numbered
1-8. An additional Class of Service "0" automatically enables all features and
cannot be changed.
Classes of Service are assigned to extensions using FF3 ExtPort# 35# (0-8)#.
Programming
Table 1-5. Class of Service features
Page 1-70
FF1 2# 5# (1-8)# (1-21)# (0 or 1)#
Class of Service
Setting Value (Feature Description)
1 Dial Tone On/Off (#50)
2 Head/Handset Exchange (#51)
3 BGM On/Off (#53)
4 Absence Message Set/Reset (71)
5 Call Forward Set/Reset (72)
6 Do Not Disturb (73)
7 Station Lockout (74)
8 Park Access (75)
9 Park Pick Up (76)
10 Meet Me Answer (77)
11 UNA Pickup (78)
DBS Manual - Revised April 2000
Section 400-Programming
Class of Service
0=Off (disabled)
Features (see
1=On (enabled)
table below)
Note: All features are
defaulted to "Off" for
Classes of Service 1-8.
DBS-2.3/9.2-400