Table of Contents
Advertisement
Section 400-Programming
CO Day Ring Assignments
Software Version: All Versions
Address: FF4 1# (ExtPort)# (Trunk)# (0 or 1)#
Description
This program determines which extension(s) will receive incoming calls on a
particular trunk when the DBS system is in "Day" mode.
Programming
Notes
Default Ring Assignments to Attendant Phone. All trunks are set by default
to ring on ports 1 and 2 (the Primary and Second Attendants).
Routing of Trunks With No Ring Assignments. If a trunk is not assigned to
ring a specific extension, it will still ring the Attendant phone.
DBS-2.3/9.2-400
FF4 1# (1-73 or 1-145)# (1-64)# (0 or 1)#
Extension Port
NOTE: Use port 73 (in single-cabinet systems) or port 145 (in double-
cabinet systems) to assign ringing to an external paging or Universal
Night Answer (UNA) device.
DBS Manual - Revised April 2000
Chapter 4. Ringing and Hunt Groups (FF4)
Trunk Number
0=Trunk does not ring.
1=Trunk rings.
Page 4-3
Advertisement
Table of Contents
