Chapter 9. Copy Program Settings (Ff9); Trunk Copy - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

Trunk Copy

Software Version: All Versions
Address: FF9 1# (SourceTrunk)# (TargetTrunk)##
Description
Use this address to copy the attributes of one trunk to another.
Copying must be done on a trunk-by-trunk basis. The first trunk entry in this
address is the trunk being copied from (the source); the second trunk entry is
the trunk being copied to (the target).
Programming
Note: You must enter two pound-signs (##) at the end of this address.
Notes
Restriction Regarding Private Trunks. This program copies all trunk
attributes except the Private Trunk Line attribute.
DBS-2.3/9.2-400
FF9 1# (1-64)# (1-64)##
Trunk Number
(Source)
DBS Manual - Revised April 2000

Chapter 9. Copy Program Settings (FF9)

Trunk Number
(Target)
Page 9-3