Extension Hold Recall Timer For Co Calls; Table 1-10. Extension Hold Recall Timer Values For Co Calls - Panasonic DBS-2.3-400 Programming Manual

Chapter 1. System Programming (FF1)

Extension Hold Recall Timer for CO Calls

Software Version: All Versions
Address: FF1 3# 3# (0-12)#
Description
This timer determines how long a trunk call remains on hold at an extension
before it recalls (starts ringing the extension again; 140 seconds by default).
Programming

Table 1-10. Extension Hold Recall Timer values for CO calls

Related Programming
Attendant Call Reversion Timer for CO Calls: FF1 3# 10# (0-12)#
Notes
Recall Treatment for CO Calls. If a trunk recall is unanswered, it will revert
to the Attendant phone after ringing for the amount of time set in the
Attendant Call Reversion Timer.
Page 1-96
FF1 3# 3# (0-12)#
Extension Hold Recall Timer setting for CO calls
Default: 7 (140 seconds) (see table below)
Setting
0 No recall
1 20 seconds
2 40 seconds
3 60 seconds
4 80 seconds
5 100 seconds
6 120 seconds
7 140 seconds
8 160 seconds
9 180 seconds
10 200 seconds
11 220 seconds
12 240 seconds
DBS Manual - Revised April 2000
Section 400-Programming
Value
DBS-2.3/9.2-400