Panasonic DBS-2.3-400 Programming Manual page 123

Section 400-Programming
Related Programming
Flex.Func. Screen Text: FF1 2# 7# 2# (Screen)# (Key)# (Text)#
Flex.Func. Screen Default: FF1 2# 7# 3# (Screen)# (0 or 1)#
Flex.Func. Screens Default (All): FF1 2# 7# 4# (0 or 1)#
Display Screens During Call States: FF3 (ExtPort)# (26-33)# (Screen)#
Notes
FF11 and FF12 in the Feature Codes. The * and # phone keys are used as
movement keys (for scrolling through addresses) while in programming
mode. Therefore, when programming feature codes for soft keys, FF11 and
FF12 are used instead to represent * and # (FF11 enters *; FF12 enters #).
The phone will not display the symbol when you press FF11 or FF12, but it
will register * or # as part of the feature code.
Initial Displays. The 15 flexible function screens are blank by default.
Displaying Feature Codes. To display an existing feature code assignment
for a soft key, use the same address (FF1 2# 7# 1# Screen# SoftKey#).
DBS-2.3/9.2-400 DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
Page 1-79