Message Key Id Code - Panasonic DBS 576 User Manual

2. Setting Up Your Phone
To set the Special Day Modes using either a large-display
or small-display phone:
1. Enter "User Maintenance" by pressing:
07
2. Enter:
Start Time in Hours - 2 characters, and Minutes - 2
3. Enter:
characters
entry.
Note: To clear an entry or existing data, press the FLASH key.
Desired mode for Special Day: 0 - None, 1 - Day 1, 2
4. Enter:
- Day 2, 3 - Night, 4 Night 1, 5 - Night 2
the entry.
Note: To clear an entry or existing data, press the FLASH key
5. To set additional Special Day modes, press the
HOLD
or
6. Repeat steps 3-5 until all Special Day modes are set. (Up to 20 Special Days
may be entered.).
Note: The entry positions are listed in Chapter 4 of Section 700 - Feature Operations.
AUTO PROG
7. Press
OR...
AUTO ON/OFF
Press
Message Key
To set the Message Key ID code using either a large-
display or small-display phone:
1. Enter "User Maintenance" by pressing:
06
2. Enter:
Extension Number of the Phone Being
3. Dial the
Programmed

Message Key ID Code

4. Enter:
Note: The ID code may contain up to 16 digits and contain 0, 1-9, *, #, pause (REDIAL
key).
• To clear an entry or existing data, press the FLASH key.
40
HOLD
, press , enter:
for the Special Day 1 mode and press
to move to the desired mode.
to return to "81-User Maintenance" (step 1 above).
to exit User Maintenance.
HOLD HOLD
and press
HOLD
and press
DBS 576 issued March 2001
ON/OFF PROG * * CONF
1 HOLD HOLD
, and press
and press
VOLUME
ON/OFF PROG * * CONF
.
.
HOLD
and press
.
HOLD
to store the
HOLD
to store
up or down arrow
to store the entry.
576-40-750