Data Length - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

Data Length

Software Version: All Versions
Address: FF1 2# 2# 5# (3 or 4)#
Description
This address sets the length of the transmitted data string over Serial Port
CN6. By default, data length is set to 8 bits.
Programming
Notes
Checking Communications Parameters. If you later change this address
value, be sure to check all Serial Port addresses -- FF1 2# 2# 1# thru 9# -- to
make sure they are set properly.
DBS-2.3/9.2-400
FF1 2# 2# 5# (3 or 4)#
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
3=7 bits
4=8 bits
Page 1-59